Sizing guide
COVERALL SIZING GUIDE:
Our F·light coveralls use European sizing. This means ordering one size up for some. Using a soft measuring tape is recommended. If in between sizes, round up to the closest measurement. Please refer to the chart below for sizing info.
|
SIZES (unisex) |
S (cm/in) |
M (cm/in) |
L (cm/in) |
XL (cm/in) |
XXL (cm/in) |
|
A |
<102/<40(chest) |
<107/<42(chest) |
107-112/42-44(chest) |
112-117/44-46 (chest) |
117-122/46-48 (chest) |
|
B |
<86/<34 (around) |
<92/<36 (around) |
97/<38 (around) |
102/<40 |
107/42 |
|
C |
<100/<39(around) |
<102/<40(around) |
104/41(around) |
<107/<42 (around) |
<110/<43 (around) |
|
D |
<61/<24 |
<63.5/<25 |
<66/<26 |
<68/<27 |
<70/<28 |
|
E |
67/26.5 |
70/27.5 |
72/28.5 |
76/30 |
81/32 |
|
F |
<160/63 |
<160/63 – 168/66 |
168/66.- 178/70 |
183+/72+ |
183+/72+ |
* (+/-) 1cm/.5in
NEW GLOVE SIZING GUIDE:
| MEN’S | ||||
| SIZE | INCHES | CM | A | CM(approx) |
| S | 7 | 18 | 6.5”-7” | 16.5-18 |
| M | 7 ½ - 8 | 20 | 7”-7.25” | 18-18.5 |
| L | 8 - 9 | 23 | 7.25”-7.5” | 18.5-19 |
| XL | 9 – 9.5 | 25 | 7.5”-8” | 19-20 |
| WOMEN’S | ||||
| SIZE | INCHES | CM | A | CM (approx) |
| S | 6 ½ | 17 | 6.5”-6.75” | 16.5-17 |
| M | 7 | 18 | 6.75”-7” | 18 |
| L | 7 ½ | 19 | 7”-7.5” | 18-19 |
CYCLING/MOTO-X GLOVES:
Use guide "A" from diagram. Measure from tip of middle finger to base of palm then use the chart below.
RESISTOR MOTO GLOVES:
Use measurement guide "B" from diagram
Our Resistor ® glove is made to provide an ergonomically tighter fit in each size. The performance materials and stitching pattern ensure a more form fitting “worn in” fit over time. It’s best to order gloves in the size you normally wear.
- Your glove size is the measurement in inches around the palm of your hand. If you are right-handed, measure your right hand. If you are left-handed, measure your left hand.
- Measure your hand with a tape measure around the knuckles of your hand. We suggest you use a soft fabric tape measure.
- Make your palm as wide and flat as possible with your thumb sticking straight out.
- After getting a measurement, use the chart for reference.
